ENGINE BLOCK REPAIR EPOXY is a two component epoxy composite made with specialty resins, hardeners, adhesion promoters combined with ferro-silicon alloys. Due to its unique composition, it is predominantly used to seal cracked & damaged engine blocks in the automotive industry. This strong, solvent free, non-rusting, non shrink, fully machinable formulation is a no-sag formula and can be applied vertically and overhead to 1/2″ inch thicknesses. Exhibits tenacious bond to all metal as well as high temperature resistance . Sectors in use: Industrial, automotive and marine applications.
INTENDED USES:
● Repair of cracked engine blocks, water jackets, cylinder heads, etc.
● Cracked oil pans, etc.
BENEFITS:
●Can be fully machined, drilled, tapped, sanded and coated over.
●Easy mix ratio, no special tools required
●No hot work involved
●Sold as kit containing mixing board, applicators, spatula set & Fiberzite Reinforcement Fabric.
●Highly chemical resistant to most chemicals
●Excellent bonding to steel, aluminum, copper, brass, stainless steel and some plastics
PRODUCT SPECIFICATIONS:
An in-depth video instructions on to repair a cracked engine block. This video takes you through proper surface prep to properly sealing the block with Engine Block Epoxy. Certain methods employed on repair may change due to location of crack or otherwise. Please read instructions carefully as well as the safety data sheet before product use.
Please contact EMP Inc at 516-624-9774 if you have any questions on product usage.
Standard EMPCORR warranties apply.