Grouting & Chocking Epoxies

Need Help in choosing the right product? Free Technical Assistance at 516-624-9774

Pour-A-Plate 5042 – (Liquid Chocking in Can) With over 20,000 PSI of compressive strength, this 2 component, shrink free 3rd generation epoxy can be used for grouting and chocking machinery equipment. Specialty resins and high strength additives allows this product to be used under craine rails, pumps, pedestals, bearing blocks, pumps, generators, fuel engines, heavy duty fans, bed plates etc. Replaces fitted shims or steel chocks. It is extremely resistant to thermal shock combined with superb resistance to aggressive chemicals. This for pours between 1/2″ to 4.25″ inches in depth. Self leveling & easy flow rate fills also crevices and voids under various types of machinery. Colors available: Blue. Easy premeasured kits include epoxy, jiffy mixer, gloves.

Pour-A-Plate 5053 – This is a heavy duty, high strength, 2 component epoxy machinery grouting compound used to where supporting of soleplates in foundations is needed. With compressive strengths exceeding 20,000 psi, Pour-A-Plate 5025 can be used as the final positioning and leveling with close tolerances. Resistant to heavy thermal shock. Resistant to aggressive chemical attack. Non Shrink. Specialty resins and high strength additives allows this product to be used with heavy duty industrial crane, rails, pumps, motors, generators, turbines, skid base mounted compressors, heavy duty fans etc. Designed to be pour between 3/4″ to 4.25″ in depth. Self leveling & easy flow rate fills also crevices and voids under various types of machinery. Colors available: Green. Easy pre-measured kits include epoxy, jiffy mixer, gloves.

Pour-A-Plate 5062HT – This is a high strength, high temperature 2 component epoxy machinery grouting compound. With compressive strengths exceeding 19,000 psi, Pour-A-Plate 5062 can be used as the final positioning and leveling with close tolerances. Resistant to heavy thermal shock. Resistant to aggressive chemical attack. Non Shrink. Specialty resins and high strength additives allows this product to be used with heavy duty industrial crane rails, fuel engines, pumps, motors, generators, turbines, skid base mounted compressors, heavy duty fans etc. Designed for pours up to 2.75″ in depth but can be build up to many layers as needed. Self leveling & easy flow rate fills also crevices and voids under various types of machinery. Colors available: Green. Easy pre-measured kits include epoxy, jiffy mixer, gloves.

Pour-A-Plate 5069 – is a 2 component, high strength chocking and grouting epoxy compound and was designed for higher flow rates when pours between 1/2″ and 2.25″ was needed and operating equipment temperature was below 150F. A version made from 5053 has been successfully used in industrial cranes, rails, pumps, motors, generators, turbines, bearing blocks, skid base mounted compressors, heavy duty fans etc. This compound exceeds a compressive strength of 17,500 psi. Color: Yellow. Easy pre-measured kits include epoxy, jiffy mixer, gloves.

***Note: Pour-A-Plate has been manufactured in several versions over the last 15 years and can be made to your specifications. Please contact our technical department for specialty needs.