ALLZITE METAL is a two component hybrid epoxy polymer is made with modified curing agents, selected blends of various metal alloys/non metallic fillers with adhesion fortifiers to bond tenaciously to oil contaminated/oily surfaces, wet & damp as well as underwater applications. This surface tolerant fast setting epoxy is predominately used as a metal rebuilding, patching, bonding and sealing applications where substrate contaminants cannot be avoided. Allzite Metal Epoxy can also be applied in cold conditions. This solvent free, non-rusting, non shrink, fully machinable formulation is a sag-free formula thus can be applied vertically and overhead to 1/2″ inch thicknesses. Exhibits tenacious bond to all metals and resistance to most MRO chemicals. Sectors: Industrial, Commercial & Marine.
INTENDED USES:
● Fast leak repairs on condensating/wet pipes & tanks
● Transfomer leak repairs, cracked engine blocks, sumps, etc.
● Repair of wet & oily welds seams
● Repairs of leaking seeping oil from tanks & pipes
● Underwater repairs to pilings, bouys, seawalls, docks, propellers, ship rudders & hulls etc
● All metal repairs patching, rebuilding, filling, sealing and bonding
BENEFITS:
● Pot life 7-10 minutes, hardens in 35 min, functional cure 6-8 hours.
● User friendly, no solvents
● Can be fully machined, drilled, tapped, sanded and coated over.
● Easy mix ratio, no special tools required
● No hot work involved
● Highly chemical, corrosion & impact resistant
● Excellent bonding to carbon steel, aluminum, copper, brass, stainless steel, concrete & most plastics
● Sold as kit containing mixing board, applicators, spatula set & Fiberzite Reinforcement Fabric.
PRODUCT SPECIFICATIONS:
Hydraulic tank repaired with ALLZITE Metal. The tank had a leaking pinhole. as shown. Area was prepared to clean bare metal. Allzite was applied at approximately 1/4″ and a metal plate was adhered on top and allowed proper cure time. Leak was sealed.