TANK REPAIR EPOXY is a two component composite is made with selected resins and hardeners combined with ferro-silicon alloys specially suited for tank repairs in industrial applications. This strong, solvent free, non-rusting, non shrink, fully machinable formulation is a no-sag formula and can be applied vertically and overhead to 1/2″ inch thicknesses. Exhibits tenacious bond to all metallic tanks and resistance to most MRO chemicals. Sectors in use: Industrial and marine applications.
INTENDED USES:
● Sealing leaks on pipes & tanks
● Sealing transformer leaks
● Repair of welds and joints / tank seam repair
● External or Internal
●Immersion Grade Chemical Resistant Repairs
● Substitute for welding or brazing
● Repair cracked pump & valve casing
BENEFITS:
● Can be fully machined, drilled, tapped, sanded and coated over.
● Stand alone or can be coated over to product a super chemical resistant repairs
● Easy mix ratio, no special tools required
● No hot work involved
● Sold as kit containing mixing board, applicators, spatula set & Fiberzite Reinforcement Fabric.
● Highly chemical resistant to most chemicals
● Excellent bonding to steel, aluminum, copper, brass, stainless steel and some plastics.
PRODUCT SPECIFICATIONS:
Tank Repair Epoxy repair conducted under a seeping chemical holding tank weld. Surface prep was conducted as per specification. Please call EMP Inc for your leaking tanks which can be repaired externally. Internal repairs can also be conducted with this product if tanks are empty during outages and based on cargo a variety of top coats are available even against aggresive chemicals such as sulfuric acid.