HELLZITE METAL EPOXY is a high temperature epoxy polymer with a specialty matrix and immense cross linking formulation based on EMP Hells Putty 500. Originally named in the lab for its high heat resistance to 310F(165C)  under immersion and 400F(204C) dry heat.   Excellent for metal rebuilding for corrosion, cavitation and erosion. This two  component composite is made with heat resistant base & activator combined with specialty metal filled alloys. This strong, solvent free, non-rusting, non shrink, fully machinable  formulation  is a no-sag formula and can be applied vertically and overhead to 1/2″ inch thicknesses.    HELLZITE may be coated over with a variety of high temp & corrosion resistant protective coatings from E.M.P Inc. Exhibits tenacious bond to all metals and resistance to most MRO chemicals. Sectors in use: Industrial and marine applications. applications

INTENDED USES:
● Repair of high temperature fluid flow equipment.
● Sealing cracks, pits, wear, holes, leaks on high temp pipes & tanks.
● Repair heat exchangers, condensers, scrubbers, blowers, steam turbine equipment, clarifiers, etc.  
● Forming irregular load bearing shims where high temperatures may be encountered.
● Repair cracked pump & casings.
● Rebuild eroded and corroded metal surfaces.
● High temperature  patching, rebuilding, filling, sealing and bonding metal to metal.

BENEFITS:
● High temperature resistance to 320F/160C (full immersion) & 400F/204C (dry heat)
● Long pot life or working time
● Can be fully machined, drilled, tapped, sanded and coated over
● Easy mix ratio, no special tools required
● No hot work involved
● Sold as kit containing mixing board, applicators, spatula set & Fiberzite Reinforcement Fabric.
● Highly chemical resistant to most chemicals
● Excellent bonding to steel, aluminum, copper, brass, stainless steel and some plastics
● Can be coated over various EMP high temperature, chemical, corrosion, erosion & cavitation coatings

PRODUCT SPECIFICATIONS: