Abrasion Resistant Epoxies

Need Help in choosing the right product? Free Technical Assistance at 516-624-9774

NO WEAR EPOXY 1000 is a two part epoxy containing small ceramic beads in various sizes, super abrasion and sliding resistant alloys and fibers. Outlasts any abrasion resistant coating on the market. Excellent impact resistance. Designed to combat particle abrasion. Provides protective lining in pneumatic conveying systems. Repair and provide abrasion resistance in pipe, elbows, chutes, conveyor screws, slurry pumps, ash handling equipment, hoppers cyclones, scrubbers, exhausters. Excellent chemical resistance. No Wear Epoxy 1000 has tenacious bonding to metal, concrete as well as ceramic. Provides outstanding adhesion to metal and concrete. Can be applied to vertical and overhead surfaces at up to 3/8″. Available in easy to use kits. Kit includes primer, epoxy, mixers.

NO WEAR EPOXY HT (HIGH TEMP) is a high temp version, two part epoxy containing ceramic beads in various sizes, super abrasion and sliding resistant alloys and fibers. It will withstand temperatures to 475F. Outlasts any abrasion resistant coating on the market. Excellent impact resistance. Designed to combat particle abrasion. Provides protective lining in pneumatic conveying systems. Repair and provide abrasion resistance in pipe, elbows, chutes, housing fans, conveyor screws, slurry pumps, ash handling equipment, hoppers cyclones, scrubbers, exhausters. Excellent chemical resistance. Can be applied to vertical and overhead surfaces at up to 3/8″. Available in easy to use kits. Kit includes primer, epoxy, mixers.

CERALOY 403 EPOXY (BRUSHABLE) is a two component, specialty blend of mirco-ceramic alloy filled high build epoxy coating. It’s smooth, high gloss, low friction consistency epoxy repair system, used as a coating to protect against turbulence, abrasion and cavitation. State of the Art formulation, Ceramic Brushable gives excellent corrosion and wear to protect pump housings, fan housings, chutes, pump voulets, elbows and pumps. Excellent chemical resistance to most solvents, acids and caustics. Available in easy to use complete kits with everything needed to use this product. Available in easy to use kits which includes epoxy, mixers, gloves etc.

CERALOY 439 EPOXY (PASTE GRADE) is a specialty product made with premium resins with the addition of aluminum and ceramic in a paste grade. This product is used to fill and seal various fluid flow control equipment that encounter metal damage errosion, oxidation and wear from various chemicals. Excellent for valve rebuilding, worn pumps casings, suction plates, pump voulets, pump Impellers refurbishment, fan housings, tube sheet repair, repair of gate valves, repairing chutes, elbows, hoppers etc. Impact & chemical resistant, it will withstand temperatures up to 375F. Can be applied to vertical and overhead surfaces at up to 1/4″. Available in easy to use kits which includes epoxy, mixers, gloves etc.

CRUSHER BACKING & DAMPENING EPOXY – This product has been used world wide and is the go to product used as a backing or damping/shock absorbent incrushers. It has excellent impact resistant and is available in a ready to use pourable self leveling mixture. With compressive strengths reaching 14000 psi, this product improves wear and break down of costly crusher parts and equipment. Shrink free.

ABRADELOX 1014 – With over 25 years in making, this product has remained the top seller when it comes to fine particulate abrasion under 1/16″ and is used world wide for pipes, elbows, cyclones, chutes etc. Available in an easy to mix 2 component. This Ceramic, Aluminum and Carborundum fillers. This non-sag paste/putty can be applied overheard and vertically and protects equipment from fine particle abrasion. Offers super chemical resistance to all MRO chemicals.

ABRADELOX 3843 – This is a 3 component, abrasion resistant , 100% solids system in a thermoset plastic resin polymer based system. 3843 is resistant to water, oils, caustics, acids, brine and various other fluids used in manufacturing plants. It consists of a primer coat, basecoat and a top coat. Abradelox 3843 is a silicone carbide reinforced system sold in 3 products per kit. Easily applied with a trowel, Abradelox is predominantly used for pipe elblows, pan feeders, classifier flights and shoes, pump casings, hoppers, feed chutes, conveyor skirts, slurry line elbows, chute lining etc. Kit contains, premeasured primer, basecoat and topcoats, gloves.