MOLDMAKING &CASTING PRODUCTS

FLEXI-MOLD 100 a two component, flexible polyurethane paste, for architectural and art restoration. Brush it on, build it up. Flexi-mold can be applied to vertical and overhead surfaces to make molds of architectural elements that cannot be removed from the structure. Molds are ready to be used in less than a day.

FLEXI-MOLD 200  is similar to Flexi-mold 100 but this product can be poured onto the model which is positioned at the bottom of a container, completely covering the model with the compound. Recommended for one part molds with deep undercuts and two part molds.

FERRO-MOLD a machinable compound for rigid poured molds. Also used for Engraving, reproduction molds, vacuum from molds, prototypes and cure boxes.

CASTWOOD POXY is a two component, light weight, exceptionally strong casting compound. Ideal for exterior and interior. The color of Castwood Poxy is light beige. It can be painted, stained and wood grained.

PLASTI-CAST is an excellent gypsum based product ideal for casting. Harder and stronger than ordinary casting plasters. Sets in 25 minutes. It reproduces fine details and gives a hard, chip resistant smooth surface. Not recommended for exterior use.

CLEAR-CAST is a two component, clear epoxy casting material. Its’ low exothermic reaction allows for small as well as large castings. It can be mixed with sand or fillers. For interior and exterior use.

FERRO-CAST is a metal filled casting compound. Impact and abrasion resistant. Can be drilled, tapped and sanded. Exterior and interior use.