HIGH TEMPERATURE COATINGS

HI-TEMP 100 is a ceramic based, one component, high temperature coating. This unique coating has a maximum temperature limit of 250F with an intermittent temperature limit of 280F. Heat curing procedure is required. With excellent moisture, oxidation, alkaline, thermal shock, acid and solvent resistance, Hi-Temp 100 has a thermal expansion that matches closely to steel. Primary applications include chemical process docks, fume hoods, stacks, vats, racks, electronic enclosures, tank linings, wall casings, etc.

HI-TEMP 101 is a ceramic and magnesium oxide based, two component, high temperature coating. This unique coating has a maximum temperature limit of 2800F with an intermittent temperature limit of 3000F. Heat curing procedure is required. With excellent moisture, oxidation, alkaline, thermal shock, acid and solvent resistance, Hi-Temp 101 has a thermal expansion that matches closely to steel. Primary applications are similar to Hi-Temp 100.

HI-TEMP 102 is a ceramic based, two component, high temperature coating. This unique coating has a maximum temperature limit of 2500F with an intermittent temperature limit of 2800F. Heat curing procedure is required. With excellent moisture, oxidation, alkaline, thermal shock, acid and solvent resistance, Hi-Temp 103 has a thermal expansion that matches closely to steel. Primary applications are similar to Hi-Temp 100.

HI-TEMP 103 is a ceramic and magnesium based, two component high temperature coating. This product is the same as Hi-Temp 101 except that this has high abrasion resistance.

HI-TEMP 104 is a ceramic and magnesium based, two component high temperature coating. This product is the same as Hi-Temp 102 except that this has high abrasion resistance.

INSUL-DIP is applied as a thixotropic coating to insulate high temperature electrical and electronic components, e.g., heating coils or resistor. Insul-Dip can also be used as an end seal for feed-thrus and connectors.

THERMO COAT-BN is a boron Nitride based, high temperature refractory coating for metallurgical processing. It withstands a maximum temperature of 1400C (Vacuum) and 1800C (inert). This coating procedure. Used as a temporary “quick coat” for protection. Lubrication, corrosion resistance for graphite, ceramic, metals, crucibles and fixtures used in reactive metal molding.

THERMO COAT-MD is a Molybdenum Disilicide based, high temperature refractory coating, for metallurgical processing. It withstands a maximum temperature of 1650C. recommended application for elements like Sn, Zn, Ag, Hg, Fe, and Na.

THERMO COAT-TC is a Titanium Carbide based, high temperature refractory coating for metallurgical processing. It withstands a maximum temperature of 900C (Vacuum), 900C(inert) and 2000C(reducing). Recommended application on reactive metals like Zn, Al, and Na.

THERMO COAT-YO is a Yttrium Oxide based, high temperature refractory coating for metallurgical processing. It withstands a maximum temperature of 1550C. recommended application on elements-Cu, steels, Nickles, Cr, Zr, Ti and Zn.

THERMO COAT-ZB is a Ziroconium Diboride based, high temperature refactory coating for metallurgical processing. It withstands a maximum temperature of 1000C(Vacuum), 1600C(inert) and 1800C (reducing). Recommended application on elements-Si, Bi, Cr, Pb, Sn, Cu and Zn.

THERMO COAT-ZO is a Yttrium Oxide based, high temperature refractory coating for metallurgical processing. It withstands a maximum temperature of 1550C. recommended application on elements-Al, Pt, Rh, and most metal elements.

THERMO-TAPE is a high temperature tape used for holding parts together for plastic curing or low temperature brazing, masking surfaces for flame spray work, insulation of RF heating coils, etc. maximum temp. of 500F with flash temperature of 4000F.