HIGH
PERFORMANCE ADHESIVES
SEAL-TIGHT 5-MINUTE EPOXY is a
two part, high strength, fast cure adhesive. Bonds, seals
and coats on all metals, ceramic, wood, concrete, brass,
tile, etc. Excellent for use on al vertical surface
applications. With a tensile strength of 3000 psi and a
maximum operating temperature of 160F, this product is
conveniently packaged. Static mixers and applicator gun sold
separately. Available in 2.5 oz dual syringes. Sets in 5
mins and full cure in 10 mins.
SEAL-TIGHT FG is a part
fiberglass impregnated, 2 component polyamide epoxy based
adhesive system Seal-Tight is used when tough and reliable
repairs are needed to fill gaps, tooling applications,
sealing, bonding parts and all general repairs. Seal-Tight
will bond to metal, wood, ceramic, tile and many plastics.
Easy to use, just attach static mixer and applicator gun.
Product will be automatically mixed and will be ready to
use. Also available in 2.5 oz, dual syringe and 2 gallon
kits. Sets in 45 mins, and full cure is maintained in 8
hours.
SEAL-TIGHT FAST SET STEEL is a
superior, 2 component, fast-set, steel filled epoxy based
adhesive. Excellent for emergency leak repair on pipes,
elbows, tanks, wastewater lines, gutters, siding and
repairing stripped threads and metallic cast parts. This
product can be drilled, tapped or machined. Excellent for
vertical and overhead repairs. Easy to use, just attach
static mixer and applicator gun. Product will be
automatically mixed and will be ready to use. Also available
in 3 oz. Dual syringe. Sets in 3 mins. and full cure is
maintained in 15 minutes.
SPRAYBOND is a multi-purpose,
clear drying, non-toxic, waterproof, pressure sensitive, 16
oz. aerosol adhesive designed to form either permanent or
temporary bonds between two porous or non-porous substrates.
Excellent for paper, cardboard, cloth and gaskets. Temporary
bond eliminates need for thumbtacks or pins, making any
surface a bulletin board. Excellent for making removable
paper stickers.
TITEBOND 1000 is a one
component, ethyl-based, cyanoarylate modified, instant
curing, high strength adhesive used for bonding non-porous,
well-matted substrates (Note: abrade non-porous articles for
better adhesion) especially rubber and most plastics (e.g.,
plexi-glass). Less than medium viscosity. This product, when
cured is moisture and weather resistant. Cures in 1 minute
and is available in 1 fl. oz. and 16 fl. oz. bottles.
TITEBOND 2000 is a one
component, methyl-based, cyanoarylate, modified, instant
curing, high strength adhesive used for bonding non-porous,
well-matted substrates (Note: abrade non-porous articles for
better adhesion) especially for metals and ceramics. This
product when cured is moisture and weather resistant. Less
than medium viscosity. Cures in one minute and is available
in a 1 fl. oz. bottle.
TITEBOND 3000 is a one component
ethyl-based, cyanoarylate modified, instant curing, high
strength adhesive used for bond non-porous, well-matted
substrates (Note: abrade non-porous articles for better
adhesion) especially wood, leather. Paper, cardboard, etc.
may also be use for rubber, plastics, ceramics and metal.
This product, when cured is moisture and weather resistant.
High viscosity. Cures in 1 minute and is available in 1 fl.
oz. and 16 fl. oz. bottles.
TITEBOND Gel is a one component,
clear curing, 100% solids, non-sag formula, cyanoarylate
modified, instant curing, high strength adhesive used for
bonding non-porous, well-matted substrates (Note: abrade
non-porous articles for better adhesion) especially metals.
Excellent for vertical and overhead applications. This
product when cured is moisture and weather resistant. May
also be use for rubber, plastic, ceramic, glass and stone.
Cures in 1 minute and is available in 20 gram tubes.
|
